Problem with sizing/decapping die
Quote from Reloader on January 31, 2021, 4:21 pmOk just got my XL-750 set up but still waiting on the 45acp die set. I have a RCBS 45acp carbide die set that I installed until I get the dillon set. For whatever reason the case doesn't go into the sizing/ decapping die I have to use my finger to get it to go in. Is this normal with a die set that's not dillon? Does the RCBC 3 die set not work on a progressive press?
Ok just got my XL-750 set up but still waiting on the 45acp die set. I have a RCBS 45acp carbide die set that I installed until I get the dillon set. For whatever reason the case doesn't go into the sizing/ decapping die I have to use my finger to get it to go in. Is this normal with a die set that's not dillon? Does the RCBC 3 die set not work on a progressive press?
Quote from Reloader on February 2, 2021, 12:51 amDillon dies have a larger radius to make it easy for the case to enter the die on a progressive machine. I've had the same issue your having with Lee dies if the case isn't fully inserted into the shell plate. When loading 9mm using mixed headstamp my Dillion dies were giving me bullet set back so I faced off about .020" from the mouth of the sizing die. The cases now go into the die .020" deeper and grip the bullets tighter and no more set back issues.
Dillon dies have a larger radius to make it easy for the case to enter the die on a progressive machine. I've had the same issue your having with Lee dies if the case isn't fully inserted into the shell plate. When loading 9mm using mixed headstamp my Dillion dies were giving me bullet set back so I faced off about .020" from the mouth of the sizing die. The cases now go into the die .020" deeper and grip the bullets tighter and no more set back issues.
Quote from Reloader on July 24, 2021, 3:18 amHi guys, I’m new here and to reloading. I’ve been setting up my new 750 and as above couldn’t get dies for 44mag so got a new set of rcbs instead - not a good idea I think. Anyway the problem I have is similar to the op, the case is fully in the shell plate but as I bring the case up slowly, it hits the outside edge of the resizing die, but does go in, the misalignment is about 1mm (40 thou) the case goes in and comes out without too much pressure. The primer is removed but the resulting primer pocket is visibly out of round. Looking at the case it does look slightly bent but goes into a gauge ok. Am I worrying about nothing? I would have thought the alignment should be spot on.
To me it seems the tool head needs to move to the right slightly because when I look into station 4 with no die there and the shell plate at the top, there is a similar misalignment there too. However the power die and flaring seem ok for alignment.I think I’ve followed all the setup to the second station correctly, but Is there something I’ve missed?
Thanks in advance
Hi guys, I’m new here and to reloading. I’ve been setting up my new 750 and as above couldn’t get dies for 44mag so got a new set of rcbs instead - not a good idea I think. Anyway the problem I have is similar to the op, the case is fully in the shell plate but as I bring the case up slowly, it hits the outside edge of the resizing die, but does go in, the misalignment is about 1mm (40 thou) the case goes in and comes out without too much pressure. The primer is removed but the resulting primer pocket is visibly out of round. Looking at the case it does look slightly bent but goes into a gauge ok. Am I worrying about nothing? I would have thought the alignment should be spot on.
To me it seems the tool head needs to move to the right slightly because when I look into station 4 with no die there and the shell plate at the top, there is a similar misalignment there too. However the power die and flaring seem ok for alignment.
I think I’ve followed all the setup to the second station correctly, but Is there something I’ve missed?
Thanks in advance
Quote from tajogej112 on September 10, 2026, 8:16 amIf I have writer’s block, I occasionally just create random words, and hopefully some idea will come from that. Take a pencil, or an empty Word document and just begin typing or composing words. Some thing is bound to hit you eventually. I used to just do these exercises where I did nothing but create random sentences without using punctuation. This helped my brain juices to flow, and it allowed me to create some short poems and short, short stories. Occasionally that rare moment when two words fit together perfectly to give you a great concept for a story occurs, and who knows? Maybe those two words can launch a series of books, or a series of plays, or the great American novel. IndoCair Alternatif
If I have writer’s block, I occasionally just create random words, and hopefully some idea will come from that. Take a pencil, or an empty Word document and just begin typing or composing words. Some thing is bound to hit you eventually. I used to just do these exercises where I did nothing but create random sentences without using punctuation. This helped my brain juices to flow, and it allowed me to create some short poems and short, short stories. Occasionally that rare moment when two words fit together perfectly to give you a great concept for a story occurs, and who knows? Maybe those two words can launch a series of books, or a series of plays, or the great American novel. IndoCair Alternatif
Quote from tajogej112 on September 29, 2026, 9:56 amGood write-up, I¡¦m normal visitor of one¡¦s blog, maintain up the nice operate, and It is going to be a regular visitor for a long time. ดูหนังเอ็กซ์.live
Good write-up, I¡¦m normal visitor of one¡¦s blog, maintain up the nice operate, and It is going to be a regular visitor for a long time. ดูหนังเอ็กซ์.live
Quote from tajogej112 on October 10, 2026, 9:54 am거래소 흐름과 주요 변수를 함께 보면서 이해하기 쉬운 스택스 가격 내용을 정리했습니다 초보자도 참고하기 쉽게 담았습니다 스택스 가격
거래소 흐름과 주요 변수를 함께 보면서 이해하기 쉬운 스택스 가격 내용을 정리했습니다 초보자도 참고하기 쉽게 담았습니다 스택스 가격
Quote from aazzazaa on October 12, 2026, 7:02 am강서 이동권, 이용 순서, 준비 항목, 체류 조건 기준을 비교하며 러시아 출장 이용 전 필요한 핵심 조건을 문의 전에 빠르게 파악하도록 정리했습니다 러시아 출장
강서 이동권, 이용 순서, 준비 항목, 체류 조건 기준을 비교하며 러시아 출장 이용 전 필요한 핵심 조건을 문의 전에 빠르게 파악하도록 정리했습니다 러시아 출장
Quote from daniyal on October 15, 2026, 7:02 amKeep up the great work , I read few blog posts on this site and I believe that your website is real interesting and has bands of good info .https://www.harderfaster.net/?sid=26b5eb23ae04865e4fc8e33ea2065496§ion=forums&action=showthread&forumid=14&threadid=368192
Keep up the great work , I read few blog posts on this site and I believe that your website is real interesting and has bands of good info .https://www.harderfaster.net/?sid=26b5eb23ae04865e4fc8e33ea2065496§ion=forums&action=showthread&forumid=14&threadid=368192
Quote from neloril804@ on October 15, 2026, 1:38 pm검색 전 비교 기준을 먼저 세우고 마감 디테일과 구성품 확인, 옵션 구성, 문의 전 체크 항목을 살피며 파텍필립 레플리카 선택에 필요한 흐름이 어긋나지 않게 정리한 소개 문구입니다 문맥은 자연스럽게 이어지도록 보강했습니다파텍필립 레플리카
검색 전 비교 기준을 먼저 세우고 마감 디테일과 구성품 확인, 옵션 구성, 문의 전 체크 항목을 살피며 파텍필립 레플리카 선택에 필요한 흐름이 어긋나지 않게 정리한 소개 문구입니다 문맥은 자연스럽게 이어지도록 보강했습니다파텍필립 레플리카
Quote from daniyal on October 24, 2026, 10:56 amI’d ought to seek advice from you here. Which is not something I do! I love reading an article that could make people feel. Also, many thanks allowing me to comment!Where to Buy WoW Forever Gold With Good Service
I’d ought to seek advice from you here. Which is not something I do! I love reading an article that could make people feel. Also, many thanks allowing me to comment!Where to Buy WoW Forever Gold With Good Service