14051 Primer Retaining Pin
Quote from Reloader on June 27, 2013, 12:05 amI have been experiancing some problems with my primer feed. I have loaded about 450 Rnd and then it stopped completely. From what I have researched and found it could be the Primer Retaining Pin. Mine is a little white plastic pin which has a rounded knob on one end and then a plastic pin about so big and then a taper down to half of so big and ends. It looks like there may have been a pin extending out from the taper at one time???
Does anyone have a dwg file of this part? Dillons picture only shows the knob end. Oh ya, I checked the spare parts kit for one too.
I have been experiancing some problems with my primer feed. I have loaded about 450 Rnd and then it stopped completely. From what I have researched and found it could be the Primer Retaining Pin. Mine is a little white plastic pin which has a rounded knob on one end and then a plastic pin about so big and then a taper down to half of so big and ends. It looks like there may have been a pin extending out from the taper at one time???
Does anyone have a dwg file of this part? Dillons picture only shows the knob end. Oh ya, I checked the spare parts kit for one too.
Quote from Reloader on June 27, 2013, 5:10 pmYour description is accurate. There is a small flat on the tapered tip. Periodically clean this pin and the hole using alcohol, then lightly grease the rear 1/4 of the pin, nearest the headed end.
Your description is accurate. There is a small flat on the tapered tip. Periodically clean this pin and the hole using alcohol, then lightly grease the rear 1/4 of the pin, nearest the headed end.