300 AAC Blackout on 1050 press

#1 · July 17, 2012, 10:39 am

Can I use .223 conversion parts as well as .308 parts to reload the .300 AAC Blackout on my 1050 press? I have a RL and a Super 1050. Has anyone done this? Any help or advice is greatly appreciated.

#2 · July 17, 2012, 4:03 pm

Use the AK powder funnel, and a small pistol case feed plate with a couple of spacer washers.

#3 · July 21, 2012, 10:37 pm

how about on a xl 650, should i do the same? thanks in advance.

#4 · August 17, 2012, 3:42 pm

The 650 works out the same. The shellplate and lower end parts are the same as 223, use the AK powder funnel.

#5 · January 8, 2013, 9:24 pm

Looking for the same answer. Wanting to reload 300 Black on my 1050 that was ordered yesterday.

Where can I pick up the dies? Which is the best brand? What exactly do I need?

New to reloading, so please forgive. We've all got to start somewhere, right!?!

#6 · May 17, 2013, 4:11 am

Posted by: dillon

Posted on: 2012-07-17 at 09:03:53 AM

Use the AK powder funnel, and a small pistol case feed plate with a couple of spacer washers.

Hi,

Do you recommend using a small pistol case feed plate to load 300 blackout on the S 1050?

Dillon Super 1050 recipe for .300 AAC Blackout

Small pistol case feed:
https://www.dillonprecision.com/#/content/p/9/pid/23822/catid/3/Dillon_Casefeed_Plate_Small_Pistol

7.62 powder funnel:
https://www.dillonprecision.com/#/content/p/9/pid/25279/catid/48/Powder_Funnels

Thanks,