Quote from
Reloader on February 12, 2013, 1:48 pm
If anyone is interested in reloading 338 Lapua on an XL 650 I have figured out a way to do it. You need to shorted the indexer block about 1/4". This will delay the shell plate from advancing before the tall cartridge comes out of the seating die. The shell plate still advances to the next station. You use a "G" Shell plate that you need to open up the slots with a dremel. A station one "G" works un-modified. Use #7 buttons. Use 338 RUM powder funnel. Use XL or Mag for case feed parts.
If anyone is interested in reloading 338 Lapua on an XL 650 I have figured out a way to do it. You need to shorted the indexer block about 1/4". This will delay the shell plate from advancing before the tall cartridge comes out of the seating die. The shell plate still advances to the next station. You use a "G" Shell plate that you need to open up the slots with a dremel. A station one "G" works un-modified. Use #7 buttons. Use 338 RUM powder funnel. Use XL or Mag for case feed parts.
