.38 super to 9mm on SDB

#1 · January 12, 2012, 12:44 am

I currently have a SDB and am set up to reload .38 super. Can you tell me the part number I will need to convert to 9mm?

Thanks

#2 · January 12, 2012, 6:15 pm

38 Super size die #22208

38 Super crimp die #12473

All other parts are interchangeable with 9mm

#3 · January 12, 2012, 6:56 pm

Thanks but I was needing to go from 38 super to 9mm so I am assuming I need the following?

22206 9x19 sizing Die

12497 9x19 Crimp Die

#4 · January 13, 2012, 4:36 pm

Correct.

#5 · January 24, 2012, 1:22 am

I purchased the 22206 and 12497 dies but I am having an occasional problem. In the seating stage (3) for some reason it occasionally peels the top of the brass back on the top of the brass where the bullet seats. It is just on on side of the brass and pushes it down about 1/4" over about 1/5th of the brass. I am using 124gr FMJ and starline brass. Anuy idea's?

#6 · January 24, 2012, 4:34 pm

How much are you flaring the case mouth? It needs to be flared at least .010" larger than the case mouth of a sized, unflared case.

#7 · January 28, 2012, 5:39 pm

Thanks, that solved my problem.