38 Super with 9mm conversion kit
Quote from Reloader on August 2, 2011, 10:20 amHi there,
I plan to purchase a SDB in .38 super as well as a 9mm conversion kit. The 38 super will be for major loads in IPSC open and the 9mm will be for minor loads in IPSC production.Please are you able to advise the minimum items I need to purchase for this? I do not mind adjusting the powder measure when changing calibers. I would however, prefer to leave the bullet seating for each caliber as is.
Thank you and regards,
Dennis
Hi there,
I plan to purchase a SDB in .38 super as well as a 9mm conversion kit. The 38 super will be for major loads in IPSC open and the 9mm will be for minor loads in IPSC production.
Please are you able to advise the minimum items I need to purchase for this? I do not mind adjusting the powder measure when changing calibers. I would however, prefer to leave the bullet seating for each caliber as is.
Thank you and regards,
Dennis
Quote from Reloader on August 2, 2011, 4:18 pmTo convert to 38 Super from 9mm on your Square Deal B, you would need the following:
38 Super size die#22208
Bullet seat stem;RN #12313, SWC #11302
taper crimp die #12473
The seating die body, powder funnel are the same. In addition to these pieces, purchase another toolhead #20113 so you can leave the die adjustments set up.
To convert to 38 Super from 9mm on your Square Deal B, you would need the following:
38 Super size die#22208
Bullet seat stem;RN #12313, SWC #11302
taper crimp die #12473
The seating die body, powder funnel are the same. In addition to these pieces, purchase another toolhead #20113 so you can leave the die adjustments set up.