380 auto conversion kit
Quote from Reloader on June 18, 2019, 6:03 pmIm am having my cases get jammed up in the case adapter area i am using the red case adapter that came with my kit but every 5-10rounds it jams up any help would be appreciated?
Thanks kevin
Im am having my cases get jammed up in the case adapter area i am using the red case adapter that came with my kit but every 5-10rounds it jams up any help would be appreciated?
Thanks kevin
Quote from Reloader on June 18, 2019, 10:01 pmKevin
I have had a few 9mm's stick as they drop through the green case ring. Right now I'm not sure if it's odd cases with slightly bulged bases or just a tight plastic ring. If it persists I might think about using a dremel to take a whisker off the inside of the plastic ring. I can't see any other issue that could cause it. To clear a stuck case, I usually just push the cases downward, from the top, using a thin rod. I have had one instance where I needed to take the case feeder tube off to clear the stuck case.Your problem sounds just like the one I have experienced.
Dave
Kevin
I have had a few 9mm's stick as they drop through the green case ring. Right now I'm not sure if it's odd cases with slightly bulged bases or just a tight plastic ring. If it persists I might think about using a dremel to take a whisker off the inside of the plastic ring. I can't see any other issue that could cause it. To clear a stuck case, I usually just push the cases downward, from the top, using a thin rod. I have had one instance where I needed to take the case feeder tube off to clear the stuck case.
Your problem sounds just like the one I have experienced.
Dave
Quote from Reloader on June 19, 2019, 3:22 pmOk thanks guys ill have to look into trimming the one i have or into getting a white one for it
Ok thanks guys ill have to look into trimming the one i have or into getting a white one for it