450 powder funnel removal
Quote from Reloader on July 23, 2010, 4:31 pmI am embarrassed to write this but I can't figure out how to get the powder funnel/expander out of my 450 powder die.
I switched to the 450 die awhile ago so I could load black powder. Now I want to go back to the 550 powder die so I can load a batch of smokeless, and darned it I can figure out how to get the funnel out.
I am embarrassed to write this but I can't figure out how to get the powder funnel/expander out of my 450 powder die.
I switched to the 450 die awhile ago so I could load black powder. Now I want to go back to the 550 powder die so I can load a batch of smokeless, and darned it I can figure out how to get the funnel out.
Quote from Reloader on July 25, 2010, 11:43 amif i remember right the 450 powder dies used an allen screw in the side of the dies to hold the expander/funnels in place..unscrew the allen screw and the funnel should drop out
the 550 and later ones use a ridge in the bottom of the die to keep it from falling out
on the outher hand it is possable that your expander has rusted in the die and just wont drop out...you may have to get a wooden dowel or something of that nature and tap it out of the die
hopes this helps
John J
if i remember right the 450 powder dies used an allen screw in the side of the dies to hold the expander/funnels in place..unscrew the allen screw and the funnel should drop out
the 550 and later ones use a ridge in the bottom of the die to keep it from falling out
on the outher hand it is possable that your expander has rusted in the die and just wont drop out...you may have to get a wooden dowel or something of that nature and tap it out of the die
hopes this helps
John J
Quote from Reloader on August 25, 2010, 1:35 pmThe 450 die should have a hex screw in the side, which locks the expander funnel in place.
I do not know that I would care to be loading black powder in a progressive machine. Any dropped powder would land in the "works" of the machine. That could eventually lead to a major bad day.
The 450 die should have a hex screw in the side, which locks the expander funnel in place.
I do not know that I would care to be loading black powder in a progressive machine. Any dropped powder would land in the "works" of the machine. That could eventually lead to a major bad day.
Quote from neloril804@ on September 10, 2026, 9:16 amwe should always be very careful about getting hepatitis because this disease is very very dangerous and deadly~IndoCair Daftar
we should always be very careful about getting hepatitis because this disease is very very dangerous and deadly~IndoCair Daftar
Quote from gikaxi on September 20, 2026, 11:38 amAw, this has been an extremely good post. In notion I have to set up writing in this way moreover – taking time and actual effort to make a top notch article… but exactly what can I say… I procrastinate alot and also by no indicates seem to go done. IndoCair Slot
Aw, this has been an extremely good post. In notion I have to set up writing in this way moreover – taking time and actual effort to make a top notch article… but exactly what can I say… I procrastinate alot and also by no indicates seem to go done. IndoCair Slot
Quote from tajogej112 on September 22, 2026, 11:38 amI discovered your blog site internet site on yahoo and appearance some of your early posts. Always maintain inside the good operate. I just extra increase RSS feed to my MSN News Reader. Seeking forward to reading far more on your part down the road!… toto togel
I discovered your blog site internet site on yahoo and appearance some of your early posts. Always maintain inside the good operate. I just extra increase RSS feed to my MSN News Reader. Seeking forward to reading far more on your part down the road!… toto togel
Quote from neloril804@ on September 22, 2026, 12:29 pmI really treasure your piece of work, Great post.bandar togel
I really treasure your piece of work, Great post.bandar togel
Quote from tajogej112 on September 22, 2026, 12:38 pmHey there! I just wanted to ask if you ever have any problems with hackers? My last blog (wordpress) was hacked and I ended up losing many months of hard work due to no data backup. Do you have any methods to stop hackers? toto togel
Hey there! I just wanted to ask if you ever have any problems with hackers? My last blog (wordpress) was hacked and I ended up losing many months of hard work due to no data backup. Do you have any methods to stop hackers? toto togel