Quote from Reloader on November 8, 2010, 2:10 pm

Not for the XL650. The rebated rim causes feeding problems. If you remove the case feed assembly, and put cases into the shellplate by hand, then we can piece one together using the 45ACP shellplate and powder funnel.

Quote from Reloader on November 18, 2010, 5:11 am

right now all i need is the case feed body.  i called your phone tech folks and they informed me that indeed shell plate 1 locator pin 4 the body bushing for 458 win mag the bushing adaptor for 458 winmag will function and does so as i have those.  from looking at the size of the case length wise it is a little shorter than then the 500sw.  im going to order the adapter for that round.

my brass is from stgarline and the rim will not fit inside the case so there is no issue with jamming atm.  when i find the right case feed adaptor that works and get it running  i will post back.

Quote from Reloader on November 25, 2010, 12:35 am

ok so far i got everything working except for the case feed arm body bushing.  i just put in an order for an extra large case feed arm assembly.  the cases are not hanging on each other in the tube and drop free without a bushing using a yellow bushing.

 

for any that are interested:

shellplate #1

locator pin #4

45 acp powder funnel

500 S&W case feed adapter yellow modified

yellow case feed bushing

---------------------

i will update with the results of the extra large case feed arm assembly results.

Quote from Reloader on April 9, 2013, 8:41 am

jmerka, could you please contact me regarding loading the 458 on a dillon xl650. boonesfarmhbc@gmail.com