45acp to 38 special

#1 · September 3, 2019, 6:06 pm

I own a square deal b that was sent to me in 45 acp. I have reloaded a large amount of 38 Special also without adjusting any dies. I obviously switched the 45 to 38 conversion , powder, primers etc. Should I be adjusting any dies?

BlastRon has reacted to this post.

#2 · September 12, 2019, 5:30 pm

If you have a separate toolhead set up for the 38, then you don't need to readjust anything unless you are using a different bullet than you used previously.

BlastRon has reacted to this post.