9mm brass sized and primed
Quote from Reloader on February 24, 2010, 10:23 pmHi, i just purchased a SDB in 9mm and was wondering how I should start as I have 2,000 pcs. of brass that has already been sized and primed (on a single stage ugh!). Do I just remove the sizer die and proceed as normal, less the primers? It appears to me that only the decapping rod is removable, not the entire die. Any help would be great. Cheers, Dave.
Hi, i just purchased a SDB in 9mm and was wondering how I should start as I have 2,000 pcs. of brass that has already been sized and primed (on a single stage ugh!). Do I just remove the sizer die and proceed as normal, less the primers? It appears to me that only the decapping rod is removable, not the entire die. Any help would be great. Cheers, Dave.
Quote from Reloader on February 25, 2010, 4:09 pmActually, removing the size die is very easy. Detach the return rod on the powder measure, remove the four toolhead bolts, and lift off the toolhead. Push the size die body out of the frame at station 1. Reattach the toolhead and failsafe rod, then remove the decapping assembly. Load.
Actually, removing the size die is very easy. Detach the return rod on the powder measure, remove the four toolhead bolts, and lift off the toolhead. Push the size die body out of the frame at station 1. Reattach the toolhead and failsafe rod, then remove the decapping assembly. Load.