Aluminum roller handle
Quote from Reloader on May 17, 2016, 9:55 amPurchased my aluminum roller handle last year. Set it up per video and comment section on this forum. One washer above and one washer below. My issue is the handle will still move a bit forward and backward as pressure is applied but I can't tighten the nut any more. Also the bearings don't really spin too freely and seem to kind of bind up. I tried a graphite powder first that didn't work then tried to lube it which also failed. At this point the machine works fine but the $50 bucks I spent on the handle is just really ticking me off. Any suggestions please. Thanks guys
Purchased my aluminum roller handle last year. Set it up per video and comment section on this forum. One washer above and one washer below. My issue is the handle will still move a bit forward and backward as pressure is applied but I can't tighten the nut any more. Also the bearings don't really spin too freely and seem to kind of bind up. I tried a graphite powder first that didn't work then tried to lube it which also failed. At this point the machine works fine but the $50 bucks I spent on the handle is just really ticking me off. Any suggestions please. Thanks guys