Blazer Brass
Quote from Reloader on January 14, 2018, 4:24 pmI noticed problems trying to index primers every few rounds. I began to notice I cannot set primers with Blazer brass (45acp). I am using CCI primers. Am I doing something wrong or are others having problems with this brass?
I noticed problems trying to index primers every few rounds. I began to notice I cannot set primers with Blazer brass (45acp). I am using CCI primers. Am I doing something wrong or are others having problems with this brass?
Quote from Reloader on January 14, 2018, 6:00 pmIf you are using large pistol primers.
look at the primer pocket. a lot of brazer brass in 45 is small primer
If you are using large pistol primers.
look at the primer pocket. a lot of brazer brass in 45 is small primer
Quote from Reloader on January 14, 2018, 7:16 pmThe other problem could be that there was a military crimp that will need to be removed. If so, you can choose to swage the primer pockets, or ream. There are advantages to each method. And varying quality of results depending upon the tool(s) chosen.
I choose to ream. But you would be hard pressed to find a better benchtop swaging tool than the Dillon.
The other problem could be that there was a military crimp that will need to be removed. If so, you can choose to swage the primer pockets, or ream. There are advantages to each method. And varying quality of results depending upon the tool(s) chosen.
I choose to ream. But you would be hard pressed to find a better benchtop swaging tool than the Dillon.