Broken base disc screw

#1 · March 18, 2011, 1:18 am

After cleaning and reassambling I broke the head off one base disk screw.What would be the easy way to remove the

broken stud in the shaft? Part # 13860 I'm just wondering if the machine will work with just one bolt installed in

the base disc? Thanks for you help. J.Henry

#2 · March 18, 2011, 2:03 pm

OK,I tapped it out with an sharp straight edge and a plastic hammer. You guys

becarefull and don't over tighten these bolts,they break ...J. Henry

#3 · March 18, 2011, 4:43 pm

Phone or e-mail us for a replacement bolt. In general use, these bolts should not be removed.