Skip to content Skip to footer
Please to create posts and topics.

Bullet dropper

I just switched to 223 from pistol rounds. I have complete tool heads including bullet droppers for each caliber, and this one doesn't want to release the bullets. It seems like the flapper for the micro switch gets hung up on the Delrin it's zip tied to. The bullets will back up behind the flapper until it gets jammed in the spring. If I manually release the micro switch flapper, they drop but don't shut off. As of now, I'm manually opening the switch allowing the clear tube to fill then pulling on the flapper to shut it off. I've tried bending the flapper a zillion different ways but the results are the same. This manual activation of the micro switch really slows the process down. Is the micro switch and flapper available as a separate item?
Thanks, JJ

We don't carry the microswitch that Mr. Bulletfeeder uses.
contact sales@cedhk.com , the US importer, for parts

Any there any chance you still have your GSI bullet feeder thay you posted about long ago?

We never sold the GSI bullet feeder. Our understanding is that GSI is not selling this product at this time.

By Reloaders, For Reloaders.

Reloader.com © 2026. All rights reserved.

Go to Top
E-mail
Password
Confirm Password