Caliber Conversion Kits
Quote from Reloader on February 18, 2013, 3:48 amI am about to place an order for the 40 S&W/10mm and the 380 ACP Caliber Conversion kits and the Die sets for each and noticed that in the shopping cart they are both listed as Stock # XL 650 Caliber C.
Do i only need to order 1 conversion kit that will work with the 40 S&W/10mm and the 380 ACP Dies ?
I am about to place an order for the 40 S&W/10mm and the 380 ACP Caliber Conversion kits and the Die sets for each and noticed that in the shopping cart they are both listed as Stock # XL 650 Caliber C.
Do i only need to order 1 conversion kit that will work with the 40 S&W/10mm and the 380 ACP Dies ?
Quote from Reloader on February 18, 2013, 4:14 amHi. Just someone here just cruising the forums and saw your question.
No, you are confuxing the base part number. On that page
http://www.dillonprecision.com/#/content/p/9/pid/23804/catid/2/XL_650_Caliber_Conversion_Kit
look down and see the exact numbers per kit for the 10mm and 40 are the same, yes. However that 380 is not.
I'm willing to bet the difference is in the powder tube and the bushings etc are probably the same.So, you need two kits yah.
Good luck loading a 380 acp. The cases are so small and are far to annoying for this grumpy bastard.
Hi. Just someone here just cruising the forums and saw your question.
No, you are confuxing the base part number. On that page
http://www.dillonprecision.com/#/content/p/9/pid/23804/catid/2/XL_650_Caliber_Conversion_Kit
look down and see the exact numbers per kit for the 10mm and 40 are the same, yes. However that 380 is not.
I'm willing to bet the difference is in the powder tube and the bushings etc are probably the same.
So, you need two kits yah.
Good luck loading a 380 acp. The cases are so small and are far to annoying for this grumpy bastard.