Calibre change

#1 · July 27, 2010, 7:50 pm

Currently running a .40 setup on my XL650, looking to have a 9mm setup also. Can anyone tell me what all I need to do a conversion please.

thanks

#2 · July 27, 2010, 9:21 pm

You will need the following:

9mm conversion kit # 21109

9mm die set #14406

650 quick change #22059 -or- if you are willing to use the same powder measure,then order a 650 toolhead #13863 -AND- powder die #20064

If you have the electric case feeder, order the small pistol casefeed plate #21073

#3 · July 29, 2010, 3:58 pm

Thanks for that.

#4 · July 30, 2010, 3:01 pm

Hi Folks,

So if I am switching to loading .223, I will need (1) .223 conversion, (2) .223 dieset and a Quick Change Setup complete with Powder measure AND the .223 die. And since I also have a case feeder, do I need a small rifle plate?

Thanks for any help you can give on this,

Alan

#5 · July 30, 2010, 3:28 pm

Yes, you will need the small rifle casefeed plate, case lube, and if you are using a semi automatic rifle, I strongly suggest using a headspace case gage (#13254) to ensure correct adjustment of the size die.