Cam Slide Catching Ejector Chute
Quote from Reloader on May 5, 2018, 2:00 amI'm not sure why this is happening and it only seems to happen when I've changed to .30-06. The underside of the cam slide catches the ejector chute and bends it under. That prevents a full push back to get a case into the shellplate at Station #1, as well as prevents seating the primer in Station #2.
I don't seem to have this problem when I load .223 or .204.
I had the manual in front of me, and carefully did every step.
Apparently, I missed something, though.
I'm not sure why this is happening and it only seems to happen when I've changed to .30-06. The underside of the cam slide catches the ejector chute and bends it under. That prevents a full push back to get a case into the shellplate at Station #1, as well as prevents seating the primer in Station #2.
I don't seem to have this problem when I load .223 or .204.
I had the manual in front of me, and carefully did every step.
Apparently, I missed something, though.
Quote from Reloader on May 9, 2018, 7:58 pmIt sounds like the loaded cartridge chute/bracket is bent. In the short term, use a zip tie to secure the upright of the bracket to the frame.
Then email us a request for a replacement. Be sure to include your address.
It sounds like the loaded cartridge chute/bracket is bent. In the short term, use a zip tie to secure the upright of the bracket to the frame.
Then email us a request for a replacement. Be sure to include your address.