Camming pin slightly rubbing again spent primer bracket
Quote from Reloader on August 1, 2021, 3:18 pmNew to XL750 and reloading in general. Just started assembling and watching the movement of the press. I note that the camming pin (and I used an after market bearing model from Snowshooze on Ebay) is ever so slightly brushing against the spent primer bracket. I can tell by the vibration transmitted through the the bracket when holding it and operating the press. Is that normal? I am not sure how I can move the bracket or the camming pin over. Any thoughts?
Here is a picture of what I am talking about: https://postimg.cc/njmdDY9V
New to XL750 and reloading in general. Just started assembling and watching the movement of the press. I note that the camming pin (and I used an after market bearing model from Snowshooze on Ebay) is ever so slightly brushing against the spent primer bracket. I can tell by the vibration transmitted through the the bracket when holding it and operating the press. Is that normal? I am not sure how I can move the bracket or the camming pin over. Any thoughts?
Here is a picture of what I am talking about: https://postimg.cc/njmdDY9V
Quote from Reloader on August 2, 2021, 1:48 pmI found my problem. The camming pin has play in it, Dillon or aftermarket, when the nut is off. I moved the pin over so it wouldn't rub, and retightened the nut. Problem solved.
I found my problem. The camming pin has play in it, Dillon or aftermarket, when the nut is off. I moved the pin over so it wouldn't rub, and retightened the nut. Problem solved.