Can the Depriming Pin be Rremove, so new pre-primed hulls can be used?d
Quote from DarrinEaton on April 9, 2025, 10:39 pmI have been buying primed hulls for years. You just need to remove the decapping pin from the resizing station. Resizing the base of a new hull won't hurt it a bit and it works great with the case feeder and everything.
I have been buying primed hulls for years. You just need to remove the decapping pin from the resizing station. Resizing the base of a new hull won't hurt it a bit and it works great with the case feeder and everything.
Quote from DarrinEaton on April 9, 2025, 11:02 pmQuote from micky_dc on June 16, 2023, 3:53 pmNew primed hulls don't require resizing so there's no need to remove the depriming pin.
The decapping pin needs to be removed so that you don't remove the new primer from the new hull. There is a collet nut on the decapping station that can be loosened to remove the decapping pin.
Quote from micky_dc on June 16, 2023, 3:53 pmNew primed hulls don't require resizing so there's no need to remove the depriming pin.
The decapping pin needs to be removed so that you don't remove the new primer from the new hull. There is a collet nut on the decapping station that can be loosened to remove the decapping pin.
Quote from The Human Manual on April 10, 2025, 3:18 pmActually, remove the E-Clip on the very top of the size/deprime die. Both the depriming pin and the collet sizer will drop out of the bottom of the die. No reason to remove size die body from the toolhead.
Actually, remove the E-Clip on the very top of the size/deprime die. Both the depriming pin and the collet sizer will drop out of the bottom of the die. No reason to remove size die body from the toolhead.