case feed problem

#1 · March 14, 2015, 6:53 pm

Converting 223 to 300BO and using small rifle plate in case feeder but nearly 25% of the brass comes down the tube upside down.

#2 · March 16, 2015, 3:11 am

You might need to move the clip toward the plate opening. After I get the brass cut to 300 BO I use the large pistol plate with a washer on the bottom.

#3 · March 16, 2015, 6:13 pm

Thanks. will give it a try

#4 · March 16, 2015, 6:14 pm

For feeding 300 BLK, use a large pistol case feed plate and a couple of spacer washers underneath it to shim up.