Case Feeder
Quote from Reloader on March 8, 2016, 10:00 pmLooking at getting a case feeder for my 550b...am I right in that you can only use the casefeeder for pistol cartridges only and not rifle? I mostly use single stage for 223 and 308 rounds but thinking of running it progressively just to deprime and trim before swaging and manually priming.
Thank you in advance
Looking at getting a case feeder for my 550b...am I right in that you can only use the casefeeder for pistol cartridges only and not rifle? I mostly use single stage for 223 and 308 rounds but thinking of running it progressively just to deprime and trim before swaging and manually priming.
Thank you in advance
Quote from Reloader on March 9, 2016, 2:54 pmOn the RL550B, the casefeeder inserts cases into the shellplate as the handle is pulled down. This means cases must be short enough to clear the bottom of the depriming pin, so 45 Colt is the tallest cartridge that will feed.(FYI, 9mm is the shortest)
On the RL550B, the casefeeder inserts cases into the shellplate as the handle is pulled down. This means cases must be short enough to clear the bottom of the depriming pin, so 45 Colt is the tallest cartridge that will feed.(FYI, 9mm is the shortest)