case inserter issue
Quote from Reloader on June 23, 2013, 5:46 amI just did a caliber conversion on my 650 and I'm having an issue with my case inserter. I used a caliber conversion kit and now when the ram goes up to drop another case into the inserter it drops it before the ram completes the stroke and in doing so falls over on the case inserter and I have to stop and slide it in manually. or the case will fall onto the case inserter and won't be aligned properly with the metal bushing and I won't be able to complete the full stroke because the case hits the metal bushing instead of going into it like it should which prevents cases on the shell plate from going into the dies until I re-adjust it. any suggestions on how to fix this?
I just did a caliber conversion on my 650 and I'm having an issue with my case inserter. I used a caliber conversion kit and now when the ram goes up to drop another case into the inserter it drops it before the ram completes the stroke and in doing so falls over on the case inserter and I have to stop and slide it in manually. or the case will fall onto the case inserter and won't be aligned properly with the metal bushing and I won't be able to complete the full stroke because the case hits the metal bushing instead of going into it like it should which prevents cases on the shell plate from going into the dies until I re-adjust it. any suggestions on how to fix this?
Quote from Reloader on June 24, 2013, 5:19 pmIf you recently changed from rifle to handgun calibers, or visa-versa, then the cam on 97082 needs to be reversed. See figure 184 on page 37 of the manual for details
If you recently changed from rifle to handgun calibers, or visa-versa, then the cam on 97082 needs to be reversed. See figure 184 on page 37 of the manual for details