Quote from Reloader on May 30, 2017, 6:09 pmWhat is the correct casefeed disc/washer configuration to use the casefeed with 6.8 spc?
What is the correct casefeed disc/washer configuration to use the casefeed with 6.8 spc?
Quote from Reloader on May 30, 2017, 9:41 pmYou should be able to use the small rifle case feed plate for 6.8 SPC
You should be able to use the small rifle case feed plate for 6.8 SPC
Quote from Reloader on May 31, 2017, 8:13 pmDoes it need any washers or just normal with no washers?
Does it need any washers or just normal with no washers?
Quote from Reloader on June 1, 2017, 4:14 pmno washers
no washers
Quote from Reloader on August 31, 2017, 6:25 pmDo I need to narrow down the metal gate at the drop? Some of the cases are dropping upside down?
Do I need to narrow down the metal gate at the drop? Some of the cases are dropping upside down?
Quote from Reloader on September 1, 2017, 4:05 pmThat helps. Move the gate about 3/16" to start.
That helps. Move the gate about 3/16" to start.
Enter the destination URL
Or link to existing content
