Casing not fitting into sizing die
Quote from Reloader on July 13, 2013, 3:41 amWe are newbies at reloading and have ran into an issue/problem. The casing will not fit into the sizing die. It bends the mouth of the case. No where close for the depriming pen to knock out primer. Case fits easily in case gage. Please help. Thank you.
We are newbies at reloading and have ran into an issue/problem. The casing will not fit into the sizing die. It bends the mouth of the case. No where close for the depriming pen to knock out primer. Case fits easily in case gage. Please help. Thank you.
Quote from Reloader on July 13, 2013, 7:08 pmAre you pushing the lever all the way forward (as in seating the primer)? If you don't push it past it's natural bottom position the case is not inserted all the way into the shell holder and will hit the edge of the sizing die.
Are you pushing the lever all the way forward (as in seating the primer)? If you don't push it past it's natural bottom position the case is not inserted all the way into the shell holder and will hit the edge of the sizing die.
Quote from Reloader on July 13, 2013, 9:28 pmThank you so much for your help. We went to a gun store here in town and asked this question and the guy was very rude. We appreciate you helping us. Hope you have a great day. 🙂
Thank you so much for your help. We went to a gun store here in town and asked this question and the guy was very rude. We appreciate you helping us. Hope you have a great day. 🙂
Quote from Reloader on July 19, 2013, 3:55 pmI ran into this before to when I first started loading on my 650. You have to get a full forward press on the handle to properly seat the new case in the shell holder.
I ran into this before to when I first started loading on my 650. You have to get a full forward press on the handle to properly seat the new case in the shell holder.