CV-2001 Tumbler Not Flowing
Quote from Reloader on July 11, 2009, 4:02 pmMy tumbler has started moving the brass and media differently--instead of flowing from center down and around to outside edges, as it should, it is simply rotating clockwise, which is not getting the brass clean. I have checked for missing screws, etc. and tried different amounts of brass and media. Any suggestions?
My tumbler has started moving the brass and media differently--instead of flowing from center down and around to outside edges, as it should, it is simply rotating clockwise, which is not getting the brass clean. I have checked for missing screws, etc. and tried different amounts of brass and media. Any suggestions?
Quote from Reloader on July 13, 2009, 3:19 pmHow old is your case cleaner? Sounds like the support springs are collapsing a bit. Drop us an e-mail and include your name and address, and we'll mail some replacement springs to you.
How old is your case cleaner? Sounds like the support springs are collapsing a bit. Drop us an e-mail and include your name and address, and we'll mail some replacement springs to you.
Quote from Reloader on July 16, 2009, 5:27 pmColtdoc, mine is doing the same thing. I thought mabe my bench had become off level or something. I'm gonna request new springs also. My CV-2001 is about 4 yrs. old.
Dillon, could this be happening because I leave the media in the bowl for months at a time ? Thanks, Bob
Coltdoc, mine is doing the same thing. I thought mabe my bench had become off level or something. I'm gonna request new springs also. My CV-2001 is about 4 yrs. old.
Dillon, could this be happening because I leave the media in the bowl for months at a time ? Thanks, Bob