Dillon 450

#1 · July 11, 2015, 10:34 pm

Looking for info on the Dillon manual primer feed . I'm missing the primer mag tube magazine and the magazine housing is made out of brass not aluminum. Anybody have some info on this? The current magazine tube will not fit this brass block just curious.

#2 · July 13, 2015, 6:05 pm

You have a very early RL450, probably made in 1980 or 81. You can install the automatic priming system from the RL550 on this, but you will need to cut off some of the left side of the base. Easily done with a hacksaw.