Dillon RL300 needs a PM
Quote from Blowout on August 16, 2024, 3:43 amI recently picked up an RL300 from a neighbor. Cleaned it up and seems to be very usable. It was set up for 38sp/357mag.
I plan to convert it to load 223 and understand the 550 shellplate, pins and funnel are all compatible to the RL300.
I'd like to add a Dillon powder measure with failsafe linkage. This would require a failsafe rod be added to the press. Would the RL550 PM failsafe kit work for this purpose or will I need to fabricate a bracket myself that mounts to the ram of the press and the bottom portion of the failsafe rod?
I recently picked up an RL300 from a neighbor. Cleaned it up and seems to be very usable. It was set up for 38sp/357mag.
I plan to convert it to load 223 and understand the 550 shellplate, pins and funnel are all compatible to the RL300.
I'd like to add a Dillon powder measure with failsafe linkage. This would require a failsafe rod be added to the press. Would the RL550 PM failsafe kit work for this purpose or will I need to fabricate a bracket myself that mounts to the ram of the press and the bottom portion of the failsafe rod?