Dimples on the side of my case
Quote from Reloader on November 24, 2008, 2:20 amIm sizing 223 and after i size the case i get dimples just under te neck is that normal?
Im sizing 223 and after i size the case i get dimples just under te neck is that normal?
Quote from Reloader on November 24, 2008, 3:44 amThis is usually caused by an excessive amount of lube. Try reducing the amount a little and see if this helps.
This is usually caused by an excessive amount of lube. Try reducing the amount a little and see if this helps.
Quote from Reloader on November 29, 2008, 3:35 amSounds like you might be sizing the case to much?
I had a few do that as few years back and that was my problem?
Hope this helps?
Sounds like you might be sizing the case to much?
I had a few do that as few years back and that was my problem?
Hope this helps?
Quote from Reloader on June 5, 2009, 10:07 pmpuddling of case lube will cause dimples, no it's not normal. It will not affect the case and when fired, the case will expand and force the dimple out. Hope this helped.
puddling of case lube will cause dimples, no it's not normal. It will not affect the case and when fired, the case will expand and force the dimple out. Hope this helped.
Quote from Reloader on June 10, 2009, 4:31 pmyou may also get a round dimple from the shoulder contacting the lube bleed hole in the shoulder of the die. Again, it goes away upon firing, and a little less lube will greatly reduce this.
you may also get a round dimple from the shoulder contacting the lube bleed hole in the shoulder of the die. Again, it goes away upon firing, and a little less lube will greatly reduce this.