Do I need more bits?

#1 · August 26, 2018, 12:52 am

Hi Guys,

crawling out from a garage fire, and restarting with a Dillon 650.
I got a decent deal on one that shipped with the 9mm conversion.

waiting on a strong mount, before I setup

I wish to work with
10mm auto
45LC
500 S&W
458socom

I purchased caliber conversion kits for
40sw/10
45LC
500sw

I have read that the magnum rifle case feed does not work real well with the 458, and my volume needs of it, and the 500, are not so high that hand feeding cases is an issue.

I believe I have a locating pin #4 in the 45LC kit, and the yellow bushing with the 500 kit

given what I own, do I need anything other than a #1 shell plate to reload .458socom??

THANK YOU

and more to come, this is a nice bit of kit !

#2 · August 27, 2018, 5:09 pm

This area is intended for queries about the Mr. Bulletfeeder, not machine support.
In answer to your question, you will also need the 458 Socom powder funnel, #21440.

#3 · August 29, 2018, 8:12 pm

Thanks Dillon

sry, just saw setup, i missed the bullet feeder part
mods please move