failsafe rod
Quote from Reloader on January 6, 2017, 8:57 pmhaving issue with XL 650 failsafe rod, I must be missing something here, watched video, slide bushing up into return bracket, rod is inserted from the left side into powder measure , wing nut tightened till spring compressed to hold business card, bushing just comes right out when raised, powder bar never moves, not sure what I'm missing?????
having issue with XL 650 failsafe rod, I must be missing something here, watched video, slide bushing up into return bracket, rod is inserted from the left side into powder measure , wing nut tightened till spring compressed to hold business card, bushing just comes right out when raised, powder bar never moves, not sure what I'm missing?????
Quote from Reloader on January 7, 2017, 3:51 pmThe bushing should be a tight fit in its bracket. Mine is very tight and does not come out. The powder bar is activated by the cartridge pressing up from beneath. If you have no cartridge in the station, the charge bar does not move and no powder drops.
The bushing should be a tight fit in its bracket. Mine is very tight and does not come out. The powder bar is activated by the cartridge pressing up from beneath. If you have no cartridge in the station, the charge bar does not move and no powder drops.
Quote from Reloader on January 7, 2017, 6:53 pmDont know why the bushing slips out, not tight at all, everything is working, just bushing slips out have to snap back in from time to time,thanks!
Dont know why the bushing slips out, not tight at all, everything is working, just bushing slips out have to snap back in from time to time,thanks!
Quote from Reloader on January 7, 2017, 7:29 pmNotify Dillon. Evidently they shipped an improper or faulty piece. Mine was so tight I had to but on leather gloves to slide it into place. Dillon will get your problem remedied.
Notify Dillon. Evidently they shipped an improper or faulty piece. Mine was so tight I had to but on leather gloves to slide it into place. Dillon will get your problem remedied.