Help Identify a part
Quote from Reloader on November 9, 2014, 9:45 pmI have taken apart my square deal to give it a good cleaning and I find that I have one small part left on the bench that I did not take out myself. Not even sure it comes from the press. It appears to be a very small black plastic rod It is only 0.27 inches long and 0.09 inches in diameter. It has a small notch on the top. Looked through the manual and can't identify it. It is not part number 13776.
Pictures can be seen at
https://plus.google.com/photos/105656587419175827297/albums/6077170721387424017?authkey=CNWClrXBjqT9DAThanks in advance.
I have taken apart my square deal to give it a good cleaning and I find that I have one small part left on the bench that I did not take out myself. Not even sure it comes from the press. It appears to be a very small black plastic rod It is only 0.27 inches long and 0.09 inches in diameter. It has a small notch on the top. Looked through the manual and can't identify it. It is not part number 13776.
Pictures can be seen at
https://plus.google.com/photos/105656587419175827297/albums/6077170721387424017?authkey=CNWClrXBjqT9DA
Thanks in advance.
Quote from Reloader on November 10, 2014, 4:44 pmIt might possibly be the end off the plastic follower rod, that activates the low primer alarm. Examine the end of this rod, see if the end has broken off or not. Otherwise, not a part of the machine.
It might possibly be the end off the plastic follower rod, that activates the low primer alarm. Examine the end of this rod, see if the end has broken off or not. Otherwise, not a part of the machine.