Quote from
Reloader on May 5, 2014, 3:53 pm
The short bend goes into the hole in the shaft adjacent to station 1. The wire goes into the groove formed between the edge of the shellplate bolt and the recess in the shellplate. The wire goes behind the shellplate bolt, not across it at all.
See Figure 6 in the SDB manual
The short bend goes into the hole in the shaft adjacent to station 1. The wire goes into the groove formed between the edge of the shellplate bolt and the recess in the shellplate. The wire goes behind the shellplate bolt, not across it at all.
See Figure 6 in the SDB manual
