lee adapter for 550
Quote from Reloader on October 30, 2009, 9:08 pmI bought lee cast bullet sizing dies. What do I need to mount the ram to the sheel plate.
Im guessing on a lee press this ram fits directly on the machine where normally a case adapter would go.
I bought lee cast bullet sizing dies. What do I need to mount the ram to the sheel plate.
Im guessing on a lee press this ram fits directly on the machine where normally a case adapter would go.
Quote from Reloader on November 2, 2009, 2:14 pmThis unit requires a smaller diameter shaft cut for a lee type shellholder to push the bullet up through the lube/size die. No adapter available.
This unit requires a smaller diameter shaft cut for a lee type shellholder to push the bullet up through the lube/size die. No adapter available.
Quote from Reloader on December 16, 2009, 9:50 pmYou need to look at a in-expensive LEE single stage press. I bought one for Midway for just that purpose. It was really cheap <$30 and it works for both resizing projectiles and de-milling reloaded rounds that I screwed up (but not too many of those). Dillon Rocks !
You need to look at a in-expensive LEE single stage press. I bought one for Midway for just that purpose. It was really cheap <$30 and it works for both resizing projectiles and de-milling reloaded rounds that I screwed up (but not too many of those). Dillon Rocks !