Loose Powder Measure
Quote from Reloader on January 30, 2020, 4:59 pmMy powder measure on my xl650 was rocking back and forth and causing the fail safe rod to hang up periodically. I temporarily tied a piece of rubber tubing around the powder measure and the bar the support that the case feed tube is attached to where it wouldn’t interfere with the operation of the press to finish the load I was doing. I inspected where the powder measure body fits into the connector body collar and noticed a (plastic) Deleon Collar Sleeve which was worn and causing the powder measure to rock. I called tech support and told them the sleeve was worn and he said he would put one in the mail for me. Thanks tech support.
My powder measure on my xl650 was rocking back and forth and causing the fail safe rod to hang up periodically. I temporarily tied a piece of rubber tubing around the powder measure and the bar the support that the case feed tube is attached to where it wouldn’t interfere with the operation of the press to finish the load I was doing. I inspected where the powder measure body fits into the connector body collar and noticed a (plastic) Deleon Collar Sleeve which was worn and causing the powder measure to rock. I called tech support and told them the sleeve was worn and he said he would put one in the mail for me. Thanks tech support.