Old sdb primer warning
Quote from Reloader on July 17, 2016, 2:50 pmIm buying an older square deal b from a friend of,mine but he says it doesn't come with the low primer warning system is there a way to update that?
Im buying an older square deal b from a friend of,mine but he says it doesn't come with the low primer warning system is there a way to update that?
Quote from Reloader on August 12, 2016, 3:23 pmmy fix for warnning device is a length of aluminum welding rod cut to were i can put on a pice of tape old machine 1980s
my fix for warnning device is a length of aluminum welding rod cut to were i can put on a pice of tape old machine 1980s
Quote from Reloader on August 12, 2016, 4:31 pmWe recommend against using any metal rod, as if dropped in with only a few primers in the tube, it can have sufficient velocity to become a firing pin and set the primers off. At least use plastic welding rod.
We recommend against using any metal rod, as if dropped in with only a few primers in the tube, it can have sufficient velocity to become a firing pin and set the primers off. At least use plastic welding rod.
Quote from Reloader on August 30, 2016, 6:29 pmIf this is your first SDB this won't work but I just transfer mine from press to press.
whatever you don't don't torque down the screws. It is easy to break you blue plastic housing if you are ham-fisted
If this is your first SDB this won't work but I just transfer mine from press to press.
whatever you don't don't torque down the screws. It is easy to break you blue plastic housing if you are ham-fisted