Optimum bench top dimensions ?
Quote from Reloader on December 20, 2014, 6:12 amWhat are the optimum top dimensions for a reloading bench ?
How much space to the left and right of the press ?
Optimum space behind the press ?
What are the optimum top dimensions for a reloading bench ?
How much space to the left and right of the press ?
Optimum space behind the press ?
Quote from Reloader on December 26, 2014, 4:29 pmOPtimum is as much room as you can get, as the areas tend to be used to store components, additional toolheads, etc. Minimum would be 15" to the right and left, so you can set up a powder scale, primer flip tray, box of projectiles. Behind it is less critical, but at least 12"
OPtimum is as much room as you can get, as the areas tend to be used to store components, additional toolheads, etc. Minimum would be 15" to the right and left, so you can set up a powder scale, primer flip tray, box of projectiles. Behind it is less critical, but at least 12"
Quote from Reloader on August 17, 2019, 2:28 amNeed to REPHRASE the question. Looking at a XL750 and eventually....if not when ordered, the Case Feeder Bowl.
Will have a 30" wide work bench. Question is the depth. Will 19 1/4" WORK OK. Prefer 24" from the other posts....but 19 1/4" looks like the most promising as I have some base cabinets that are sturdy and will work.
Thanks
Need to REPHRASE the question. Looking at a XL750 and eventually....if not when ordered, the Case Feeder Bowl.
Will have a 30" wide work bench. Question is the depth. Will 19 1/4" WORK OK. Prefer 24" from the other posts....but 19 1/4" looks like the most promising as I have some base cabinets that are sturdy and will work.
Thanks
Quote from Reloader on August 18, 2019, 3:02 amI don’t know what “optimum” is but I can tell you what it’s not.....it’s not what I’m getting with my current bench surface. It’s 4’ wide x 2’ deep...with shelves in the rear.
Onto this rather expansive real estate I am trying to mount a 750 and 550, both on tall Ultramounts.
Not much room leftover for other stuff.
Fun times.
Just glad this is a temporary setup until we move.
I don’t know what “optimum” is but I can tell you what it’s not.....it’s not what I’m getting with my current bench surface. It’s 4’ wide x 2’ deep...with shelves in the rear.
Onto this rather expansive real estate I am trying to mount a 750 and 550, both on tall Ultramounts.
Not much room leftover for other stuff.
Fun times.
Just glad this is a temporary setup until we move.