Quote from
Reloader on January 18, 2018, 1:12 am
That is an alignment tool. It is used for aligning the platform with the tool head. You put a powder die on station 1 and slip in the tool. When you raise the platform the alignment tool should go in to the primer feed hole. You should only need to do this if you take the platform off.
That is an alignment tool. It is used for aligning the platform with the tool head. You put a powder die on station 1 and slip in the tool. When you raise the platform the alignment tool should go in to the primer feed hole. You should only need to do this if you take the platform off.
