Pawl jumping on downstroke
Quote from Reloader on May 15, 2018, 7:33 pmI have pulled the press apart and cleaned/lubed everything. The indexing pawl is jumping when the index bolt rounds the lower part of the cam into the 'valley' this is happening without the shell plate on so it is not the indexing arm catching on shell plate. the problem seems to go away when I put more pressure on the handle on the downstroke. Will post video once it loads to youtube
I have pulled the press apart and cleaned/lubed everything. The indexing pawl is jumping when the index bolt rounds the lower part of the cam into the 'valley' this is happening without the shell plate on so it is not the indexing arm catching on shell plate. the problem seems to go away when I put more pressure on the handle on the downstroke. Will post video once it loads to youtube
Quote from Gene Wahl on March 13, 2024, 6:54 pmI am having the same problem, also with shellplate on the bind is more severe.
Did you find a solution for you problem?
I am having the same problem, also with shellplate on the bind is more severe.
Did you find a solution for you problem?
Quote from The Human Manual on March 15, 2024, 4:02 pmApply grease to the angled bottom surface of the white delrin index lever. This happens when the index lever lacks lube as it is forced against the indexing bolt.
Apply grease to the angled bottom surface of the white delrin index lever. This happens when the index lever lacks lube as it is forced against the indexing bolt.