plastic ram bearing guides

#1 · January 2, 2015, 1:32 pm

Picked up a used SDB and noticed that three of the white plastic ram corner bearings were separated from the machine. (loose in box.)I tried to insert them back to their proper location, but they want to move along with the ram movement. The machine is set up for .38 special . Please advise. Thanks.

#2 · January 2, 2015, 5:09 pm

The corner bearings should have tabs on the top and bottom to secure them. Sounds like yours have broken off. Please phone or email for a replacement set. If you email, please include your address.