powder
Quote from Reloader on March 5, 2020, 4:25 pmhaving problems with my square deals.Have 3 set ups.2 of them ,the powder charge portions varies plus or minus up to .5 grans of powder.Any ideas
having problems with my square deals.Have 3 set ups.2 of them ,the powder charge portions varies plus or minus up to .5 grans of powder.Any ideas
Quote from Reloader on March 13, 2020, 4:46 pmCheck the connector body collar, the bottom portion of the powder measure that attaches to the top of the powder die, for damage.
Be sure the powder bar goes all the way over, and the case mouth is being flared at least .010" larger than the sized, unflared case mouth.
Be sure to start with the hopper at least 2/3 full. Throw 10 charges and dump them back before you begin weighing charges.
Check the connector body collar, the bottom portion of the powder measure that attaches to the top of the powder die, for damage.
Be sure the powder bar goes all the way over, and the case mouth is being flared at least .010" larger than the sized, unflared case mouth.
Be sure to start with the hopper at least 2/3 full. Throw 10 charges and dump them back before you begin weighing charges.