Powder Check question for XL650
Quote from Reloader on April 8, 2012, 2:10 amHave XL650 setup for 45 ACP. Purchased caliber conversion & quick change to switch to 38/357. Should I also get another powder check or can I switch the one I have quickly & easily ?
Have XL650 setup for 45 ACP. Purchased caliber conversion & quick change to switch to 38/357. Should I also get another powder check or can I switch the one I have quickly & easily ?
Quote from Reloader on April 9, 2012, 2:42 pmif you have another powder die you can easily move the powdercheck from one toolhead to the next. Some users prefer to dedicate a separate powdercheck to each toolhead, as they switch calibers frequently.
if you have another powder die you can easily move the powdercheck from one toolhead to the next. Some users prefer to dedicate a separate powdercheck to each toolhead, as they switch calibers frequently.
Quote from Reloader on August 6, 2012, 4:18 pmFYI... I have one powder check for the 6 calibers I load for. I set up the powder check holder at exactly the same height above the shell plate so that once I install the powder check, all I have to do is adjust the rod for different powder settings. Adjustment takes about 5 minutes.......
FYI... I have one powder check for the 6 calibers I load for. I set up the powder check holder at exactly the same height above the shell plate so that once I install the powder check, all I have to do is adjust the rod for different powder settings. Adjustment takes about 5 minutes.......