Powder funnel alignment
Quote from Reloader on September 9, 2011, 5:38 pmHaving a problem with my 650. Quick background. I have had it for 2 years and run about 10K of 9mm through it without a hitch. Recently started switching calibers not sure if that is relevant to my problem.
After switching back to 9mm the powder funnel catches the edge of the case every 1-3 cases through. I can solve the problem everytime by slightly indexing the shell plate forward. I removed the palte cleaned the bearing & spring and that didn't change the problem. Shell plate is lined up with primer properly, no problems priming at all. almost seems like the case is tipping a little?
They say a picture is worth 1,000 words. Please see links below. Any help would be much appreciated!
Having a problem with my 650. Quick background. I have had it for 2 years and run about 10K of 9mm through it without a hitch. Recently started switching calibers not sure if that is relevant to my problem.
After switching back to 9mm the powder funnel catches the edge of the case every 1-3 cases through. I can solve the problem everytime by slightly indexing the shell plate forward. I removed the palte cleaned the bearing & spring and that didn't change the problem. Shell plate is lined up with primer properly, no problems priming at all. almost seems like the case is tipping a little?
They say a picture is worth 1,000 words. Please see links below. Any help would be much appreciated!
Quote from Reloader on September 10, 2011, 4:28 pmPush down on the edge of the shellplate at the bullet seating station. If it feels springy, then the shellplate bolt needs to be tighter. BTW, you pics are downloadable only, so I won't risk opening anything. If possible, attach as jpg
Push down on the edge of the shellplate at the bullet seating station. If it feels springy, then the shellplate bolt needs to be tighter. BTW, you pics are downloadable only, so I won't risk opening anything. If possible, attach as jpg