Powder Funnel Stuck in Die
Quote from Reloader on January 25, 2013, 8:01 pmGot a SDB that's been in storage for awhile and I've got two powder funnels stuck in powder dies and they will not move. One of the funnels looks bent. I'm guessing corrosion is the problem. Any ideas on resolution? Thanks!
Got a SDB that's been in storage for awhile and I've got two powder funnels stuck in powder dies and they will not move. One of the funnels looks bent. I'm guessing corrosion is the problem. Any ideas on resolution? Thanks!
Quote from Reloader on January 25, 2013, 11:56 pmDisassemble so part 13865 Powder Die, with stuck power funnels are separate of the power system. See page 5 of owner manual (available online for download) for a good picture of parts to powder system.
Put machine or motor oil in powder die (both ends). leave soaking for several hours, apply more in a few hours. Turn upside down on piece of wood. Take dowel lightly tap out. If all else fails, call dillon and purchase two new parts. Not a huge cost lost. If you get lose, 4ooo steal wool the parts. Clean with rubbing alcohol (twice).
Worry about the rest of the loader needing good cleaning and lubing.
Disassemble so part 13865 Powder Die, with stuck power funnels are separate of the power system. See page 5 of owner manual (available online for download) for a good picture of parts to powder system.
Put machine or motor oil in powder die (both ends). leave soaking for several hours, apply more in a few hours. Turn upside down on piece of wood. Take dowel lightly tap out. If all else fails, call dillon and purchase two new parts. Not a huge cost lost. If you get lose, 4ooo steal wool the parts. Clean with rubbing alcohol (twice).
Worry about the rest of the loader needing good cleaning and lubing.