Powder throw
Quote from Reloader on June 3, 2013, 9:03 pmI have tried to set this and it is not consistent. 8.5 gn is what I'm looking to get sometimes it hits. But when I see 8.9-8.1 not good cycled 30 times not holding I could deal with .1 gn tolerance. I guess.
What is up?
I have tried to set this and it is not consistent. 8.5 gn is what I'm looking to get sometimes it hits. But when I see 8.9-8.1 not good cycled 30 times not holding I could deal with .1 gn tolerance. I guess.
What is up?
Quote from Reloader on June 3, 2013, 9:01 pmhad the same issues all you need to do is hold lever back like your priming a case tighten wing nut on powder rod till the little spring is compressed about 85 percent and after 2-3 pulls it will be normal the more you use it the better it regulates hope this helps it is hard to get quick responses here so I thought I would try to help happy loading
had the same issues all you need to do is hold lever back like your priming a case tighten wing nut on powder rod till the little spring is compressed about 85 percent and after 2-3 pulls it will be normal the more you use it the better it regulates hope this helps it is hard to get quick responses here so I thought I would try to help happy loading
Quote from Reloader on June 6, 2013, 3:00 pmWhich powder are you using? Some meter a lot better than others. Ball powders like WW231 meter very accurately. Flake powders like Unique are a lot more variable, particularly with small charges.
Which powder are you using? Some meter a lot better than others. Ball powders like WW231 meter very accurately. Flake powders like Unique are a lot more variable, particularly with small charges.