pretty bumed out
Quote from Reloader on March 16, 2010, 11:56 pmafter having good luck with my dillon case trimmer swedger etc i bought me a nice rl 450 with no reservations at the gunshow last weekend. all pumped i ordered my 223 conversion kit and then fond i cant get parts for the manual primer feed. its set up for large pistol and i need small rifle. i bout couldnt believe my ears when i herd dillon dont carry parts for this. with all this no bull crap i hear i was dumbfounded.SOUNDS LIKE BULL TO ME! now if i want to use this thing out the window goes another 90+ bucks to upgrade. any one know were i might be able to get small rifle tubes for this manual dillon primer feed? AND ANY ONE WANT TO BUY A XXL DILLON SHIRT?
after having good luck with my dillon case trimmer swedger etc i bought me a nice rl 450 with no reservations at the gunshow last weekend. all pumped i ordered my 223 conversion kit and then fond i cant get parts for the manual primer feed. its set up for large pistol and i need small rifle. i bout couldnt believe my ears when i herd dillon dont carry parts for this. with all this no bull crap i hear i was dumbfounded.SOUNDS LIKE BULL TO ME! now if i want to use this thing out the window goes another 90+ bucks to upgrade. any one know were i might be able to get small rifle tubes for this manual dillon primer feed? AND ANY ONE WANT TO BUY A XXL DILLON SHIRT?
Quote from Reloader on March 17, 2010, 1:31 pmOn the priming system you have, is the primer magazine brass or aluminum? If aluminum, does the bottom of the magazine have a plastic tip on it, or is the end turned down?
On the priming system you have, is the primer magazine brass or aluminum? If aluminum, does the bottom of the magazine have a plastic tip on it, or is the end turned down?
Quote from Reloader on March 17, 2010, 7:19 pmCust and paste this into an e-mail, and include your name and address- email to garyk@dillonprecision.com . I suspect I can help you out.
Cust and paste this into an e-mail, and include your name and address- email to @dillonprecision.com">garyk@dillonprecision.com . I suspect I can help you out.
Quote from Reloader on March 25, 2010, 8:47 pmGary thank you so much! more than i was hopeing for! i just ordered the rest of the stuff and a few goodies also. i cant wait to start punching out 223s! Dillon ROCKS!
Gary thank you so much! more than i was hopeing for! i just ordered the rest of the stuff and a few goodies also. i cant wait to start punching out 223s! Dillon ROCKS!
Quote from Reloader on April 28, 2010, 12:33 amWow The 450 hasn't been manufactured for quite a while. I bought my 550 used over 12 years ago. If I were you I'd get the update kits and make it a true 550. Another option would be to get a autoprime tool & prime in a separate step right after deprime & resize. I have one that Lee made & it works well.
I know that when our goals are blocked we get frustrated but this seldom helps reach our goals. In my industry we must provide replacement parts seven years after last date of manufacture I think Dillon has exceeded this.
If you can get the shirt in large I'd be glad to wear it
xring1958
Wow The 450 hasn't been manufactured for quite a while. I bought my 550 used over 12 years ago. If I were you I'd get the update kits and make it a true 550. Another option would be to get a autoprime tool & prime in a separate step right after deprime & resize. I have one that Lee made & it works well.
I know that when our goals are blocked we get frustrated but this seldom helps reach our goals. In my industry we must provide replacement parts seven years after last date of manufacture I think Dillon has exceeded this.
If you can get the shirt in large I'd be glad to wear it
xring1958