Primer
Quote from Reloader on October 22, 2016, 10:09 pmMy primer disk is not advancing properly. It only advances about 90% of the way and blocks the primer seater from rising. I've taken it all apart and can see no blockages, breakage or other problems. Like most things, it was working fine while I was making about 200 rounds of 223, then 'nope'.
Any suggestions?
Thanks
My primer disk is not advancing properly. It only advances about 90% of the way and blocks the primer seater from rising. I've taken it all apart and can see no blockages, breakage or other problems. Like most things, it was working fine while I was making about 200 rounds of 223, then 'nope'.
Any suggestions?
Thanks
Quote from Reloader on October 23, 2016, 4:18 pmNever mind. I took the press apart and strip cleaned everything and re-lubed it. It seems to be functioning again. While I still didn't find anything wrong or too dirty, maybe it was just the combination of little things. I’ll report back if I have any further issues.
Thanks
Never mind. I took the press apart and strip cleaned everything and re-lubed it. It seems to be functioning again. While I still didn't find anything wrong or too dirty, maybe it was just the combination of little things. I’ll report back if I have any further issues.
Thanks