Primer and powder everywhere
Quote from Reloader on April 19, 2014, 4:13 amHi just purchased my first progressive press a SDB. I had some problems early on with the primers. They were not dropping into the cup and when rotating from pos 2 was loading powder into an unprimed case. Now I have powder powder inside the press and is binding the primer feed mechanism. The primer feed will not center every time and will hit an edge and fly out of the press depending on the force which isn't much. I've completed 10 rounds and 4 had primers seated upside down. I'm guessing the primer feed and centering issues will do away when the powder has been cleaned out. What's the best way to do this? I tried compressed air but it doesn't do much. Please help!!!!
Hi just purchased my first progressive press a SDB. I had some problems early on with the primers. They were not dropping into the cup and when rotating from pos 2 was loading powder into an unprimed case. Now I have powder powder inside the press and is binding the primer feed mechanism. The primer feed will not center every time and will hit an edge and fly out of the press depending on the force which isn't much. I've completed 10 rounds and 4 had primers seated upside down. I'm guessing the primer feed and centering issues will do away when the powder has been cleaned out. What's the best way to do this? I tried compressed air but it doesn't do much. Please help!!!!