Primer disorientation

#1 · April 18, 2010, 3:36 pm

I know of the adjustment screw that makes the primer hits the hole. But what if it´s not right sideways? Mine is slightly hitting the side regardless of how I set the depth of the primer rod. This somtimes makes the primer hop on the side. Is there any solutuion?

#2 · April 19, 2010, 1:14 pm

What caliber are you loading? Without a piece of brass in the shellplate, does the primer come up through the platform okay?

#3 · April 21, 2010, 9:41 am

I loosened the hole primer mag, found that there was a bit side adjustmet to make, pushed the handle while i reattached it. Fits perfect now.