Primer Feeding
Quote from Reloader on January 14, 2010, 12:58 amI am loading 40 s&w with a Square Deal B. After I load 2 or three rounds you can not seat primer. You are unable to push the handle up to seat the primer. I have to remove the 3 screws that hold the primer tube. When I take the primer tube and the primer seating device out there will be a number of primers laying on top and all around this part. I clean it out replace the primer tube and it might load 6 to 10 rounds then I have to repeat this process again. Please help.
I am loading 40 s&w with a Square Deal B. After I load 2 or three rounds you can not seat primer. You are unable to push the handle up to seat the primer. I have to remove the 3 screws that hold the primer tube. When I take the primer tube and the primer seating device out there will be a number of primers laying on top and all around this part. I clean it out replace the primer tube and it might load 6 to 10 rounds then I have to repeat this process again. Please help.
Quote from Reloader on January 14, 2010, 2:37 pmI suggest you phone us when you can be in front of the machine for assistance. It sounds like either the plastic magazine tip is damaged, the magazine is not inserted properly, or the cup and punch on the primer slide are too tall. If possible, have the priming system off and in your hand when you phone us.
I suggest you phone us when you can be in front of the machine for assistance. It sounds like either the plastic magazine tip is damaged, the magazine is not inserted properly, or the cup and punch on the primer slide are too tall. If possible, have the priming system off and in your hand when you phone us.